How to set up your bridge stand
The bridge stand kit consists of a bent plastic stand, two support triangles and four screws. To mount your Fabman bridge onto the stand you will need a T8 screwdriver.
Step 1: Attach support triangles to the Fabman bridge stand.
Step 2: Attach three screws to the front of the stand.
Step 3: Attach bridge to the three srews in the stand.
Step 4: Screw in the fourth screw from the back of the stand to fixate the bridge.
Step 5: Feed the connectors through the hole in the bottom of the stand and connect the cables to the bridge.
Step 6: Guide the cable carefully through the hooks in the stand for strain releif.